Νέα
01/06/2016
New Product GSM Controller NC-65
09/03/2015
Participation in INTERNATIONAL ASANSOR ISTANBUL 2015 Exhibition – Turkey 26-29March 2015
15/10/2014
New stencil printing machine Go29 from pbt
Application
Maximal printing area for 29″ stencil
Printing of very small chips, BGA, LGA structures
Easy and repeatable print process with low investment costs
Unique features
Fine control of snap-off process (speed, uniformity)
Fast board changeover
Only partial opening needed for handling
Easy opening with pneumatic servo-system
Stops at any angle
Extra wide opening angle for easy stencil cleaning and tooling adjustment
Adjustable width of frame clamping
Fast squeege exchange – no tool needed
Automatic squeege lift for frame exchange and paste refill
Laser-guided and movable vision system for quick setup
Wide range of adjustable magnetic support tooling
Pneumatic lock of print frame
Control system
PLC with 5.7″ touchscreen
Programmable speed and range or squeegee
Controlled separation speed of table
Adjustable squeegee pressure
Programable print gap
Password protection in three levels
03/10/2014
The ACE-12 Touch is designed for use in access control installations of lifts allowing the user identification via card / keyring EM4102 protocol or four-digit numeric password (PIN).
It is a standalone system that has contacts that can be connected to the call button and floors.
The sturdy metal housing and the touch keypad with backlighting make it resistant to frequent use.
The two LED lights and buzzer beeps indicate system status and make the device easy to use.
Specifications
- Frequency 125KHz
• Power supply 12VDC (100mA)
• Operating Temperature (-20˚C to 70˚C)
• Distance Card Reader 0-6cm
• Power indicator with LED
• Acoustic mode
• Alarm violation
• 1000 Users
• Enable / Disable User
• 1 relay output, two contacts (NO / NC)
• Dimensions (125mm x 84mm x 23mm)
• Weight 300g
02/10/2014
The ACE-12 is designed for use in access control installations of lifts allowing the user identification via card / keyring EM4102 protocol or four-digit numeric password (PIN).
It is a standalone system that has contacts that can be connected to the call button and floors.
The sturdy metal housing and metal buttons with backlighting make resistant to frequent use.
The two LED lights and buzzer beeps indicate system status and make the device easy to use.
Specifications
- Frequency 125KHz
• Power supply 12VDC (80mA)
• Operating Temperature (-20˚C to 60˚C)
• Distance Card Reader 0-6cm
• Power indicator with LED
• Acoustic mode.
• Alarm violation
• 2000 Users
• Enable / Disable User
• 1 relay output, two contacts (NO / NC)
• Dimensions (135mm x 58mm x 2mm)
• Weight 700g
27/05/2014
Exhibition: Inelex 2014 23-25 May 2014
K. Nissoy kai Sia O.E. had another very successful appearance at the exhibition Inelex 2014 in Izmir, Turkey, and we would like to thank all our visitors that came to our booth. At this exhibition K. Nissoy kai Sia O.E. had the chance to show to the visitors the new series of TFT display for elevators as well as the color indicator display. The RFID Access Control system, ACE-xx was once more the center of attention and visitors from Europe and the Middle East showed great interest.
10/03/2014
Exhibition : Lift Balkans 11-13 March 2014
K. Nissoy kai Sia O.E. had a very successful appearance at the exhibition Lift Balans 2014 in the IEC in Sofia, Bulgaria and we would like to thank all our visitors that came to our booth.
At our booth visitors had the chance to get to know the company and its services (PCB assembly, Cable assembly, Design etc) as well as have a first look at our product ACE-xx.
Great interest was shown at our new product for Access Control ACE-xx, where visitors had the opportunity to see first hand the operation and meet its potential.
At the Forum for Elevators that took place on the last day of the exhibition the official presentation of the product ACE-xx was made to exhibitors, companies and all attendees.
