15.10.2014

New Semi-automatic Printing Machines – Go29 from pbt

Application

Maximal printing area for 29" stencil
Printing of very small chips, BGA, LGA structures
Easy and repeatable print process with low investment costs

Unique features

Fine control of snap-off process (speed, uniformity)
Fast board changeover
Only partial opening needed for handling
Easy opening with pneumatic servo-system
Stops at any angle
Extra wide opening angle for easy stencil cleaning and tooling adjustment
Adjustable width of frame clamping
Fast squeege exchange - no tool needed
Automatic squeege lift for frame exchange and paste refill
Laser-guided and movable vision system for quick setup
Wide range of adjustable magnetic support tooling
Pneumatic lock of print frame

Control system

PLC with 5.7" touchscreen
Programmable speed and range or squeegee
Controlled separation speed of table
Adjustable squeegee pressure
Programable print gap
Password protection in three levels

03.10.2014

New Product ACE-12 Touch

The ACE-12 Touch is designed for use in access control installations of lifts allowing the user identification via card / keyring EM4102 protocol or four-digit numeric password (PIN).nnIt is a standalone system that has contacts that can be connected to the call button and floors.nnThe sturdy metal housing and the touch keypad with backlighting make it resistant to frequent use.nnThe two LED lights and buzzer beeps indicate system status and make the device easy to use.nn Specifications nn• Frequency 125KHzn• Power supply 12VDC (100mA)n• Operating Temperature (-20˚C to 70˚C)n• Distance Card Reader 0-6cmn• Power indicator with LEDn• Acoustic mode.n• Alarm violationn• 1000 Usersn• Enable / Disable Usern• 1 relay output, two contacts (NO / NC)n• Dimensions (125mm x 84mm x 23mm)n• Weight 300g

02.10.2014

New Product ACE-12

The ACE-12 is designed for use in access control installations of lifts allowing the user identification via card / keyring EM4102 protocol or four-digit numeric password (PIN).

It is a standalone system that has contacts that can be connected to the call button and floors.

The sturdy metal housing and metal buttons with backlighting make resistant to frequent use.

The two LED lights and buzzer beeps indicate system status and make the device easy to use.

Specifications

• Frequency 125KHz
• Power supply 12VDC (80mA)
• Operating Temperature (-20˚C to 60˚C)
• Distance Card Reader 0-6cm
• Power indicator with LED
• Acoustic mode.
• Alarm violation
• 2000 Users
• Enable / Disable User
• 1 relay output, two contacts (NO / NC)
• Dimensions (135mm x 58mm x 2mm)
• Weight 700g